White walls are a clean, crisp choice for home furnishings. They also create a sense of spaciousness and lightness in the house. White is a versatile color that can be used as a base color. Therefore, the white wall will not clash with other colors and materials. White walls can reflect both the cold-textured stone or the thick, warm wood. The house’s visual temperature.
It is important to think about the practical aspects of home design. White walls will accumulate dirt over time and need to be cleaned at least once a year. To avoid significant contamination such as dirt, surface dust, abrasions, spider webs, or spider webs on wall corners and ceilings, cleaning frequency might need to be increased. This will make it more difficult to clean up after six months.
6 steps to make your walls white again
To be a good worker, one must first sharpen his knives. You will need some tools to clean the wall. These include a vacuum cleaner or dust collector, mop or brush, mop, broom, non-abrasive sponge, mild detergent, natural baking powder or toothpaste, and a bucket. It doesn’t matter if you are promoting specialized cleaning agents or creating high-tech products. Basic cleaning products will suffice. For your own protection and to prevent allergies, make sure you have gloves, masks, or hoods.You will only need basic cleaning products to clean the white walls.
First Step
You will need to take down all furniture and other items from the wall before you clean it. This is a great opportunity to dust off walls, furniture, and accessories.
Second Step
It takes a bit of skill to clean the wall surface. Brute force is not enough. Dust and dirt will only make your house more filthy.
To remove dust, you can either use a vacuum or a dust brush on a vacuum. You can use a retractable mop or broom, covered with a chemical fiber cloth (such a microfiber cloth) to clean corners and ceilings. Dust.
Dust removal must also be done from high places. Also, pay attention to the hardware of the tool to ensure that it does not scratch the wall
Third Step
Fill a bucket with warm (not hot) water. A little mild detergent can be added. To avoid soap foam that is too thick, don’t use too much. The foam can absorb dirt making it difficult to clean.
Baking soda can be used as a natural cleaner, but wall dirt can be stubborn and difficult to clean.
Fourth Step
This is an important step that will allow you to determine if the cleaning solution will cause damage to the wall’s color or luster.
You can first dip a towel on the towel, then adjust the cleaning solution. The third step is to wipe the back and wall behind the painting. Wait a few hours and check if the paint or wall paint is still as good.
Fifth Step
Construction is officially underway! Use a non-abrasive sponge, or cotton cloth, to soak the wall in the cleaning solution. After it has dried, wring the wall dry, but not soaked. This will prevent wall paint and water stains from sticking to the wall. To clean sections of the wall, gently use a circular motion. It is best to clean the wall from the top, as water drops will fall down.
Sixth Step
If you notice any dirt or abrasion marks, such as mold or handprints, on the wall, the nano decontamination sponge (magic eraser), can be used. After moistening the area with water, wipe it dry with a clean cloth or tissue. To avoid self-destructive actions, be careful not to use too much force.You should only contact a cleaning company if there is any wall cancer or serious dirt.
If you’ve followed all the steps to clean the wall but dirt remains, peeling paint or water stains are still visible, you might want to “repaint the whole wall”. It is not a good idea to paint just one spot on the wall. There will be different tones for old, new, and faded paint. The gloss of even the same paint color will vary.
You should not only repaint the walls but also contact a cleaning company if you notice any wall stains (water stains, smoke stains or wall cancers) that have become persistent. The constant occurrence of “wall carcinoma” means that you should not paint the walls. Instead, find the source of the leakage and fix it before it is too late.
