Do you have a necklace that’s been knotted up and is just annoying you? It seems like every time you wear it, the knot decides to show up and make your life difficult. Well, don’t worry, I’m here to help! 

There are several ways to get the knots out without damaging the jewelry. The best way to avoid knots in the first place is to store necklaces separately so they can’t become tangled.

In this post, I will show you how to get knots out of necklaces quickly and easily. So keep reading for all the details!

Is There An Easy Way To Get A Knot Out Of A Necklace?

It happens to the best of us we’re getting ready to head out the door and we reach for our favorite necklace, only to find that it’s become a tangled mess. Thankfully, there are a few easy ways to get knots out of necklaces, without damaging the delicate chain. 

The first step is to find the end of the chain this can be tricky, but it’s important to avoid pulling on the wrong part of the necklace and making the knot tighter. Once you’ve found the end of the chain, gently work the knot loosely with your fingers. 

If the knot is particularly tight, you may need to use a small pair of pliers or tweezers. Be careful not to pull too hard, as this could break the chain. 

If all else fails, you can always take your necklace to a jewelry store or repair shop and have them handle it for you. 

For small knots, using a needle or pin to pick at the threads can be effective. Gently work the needle under the tangle and pull apart any loops that are tangled together.

If the knot is bigger and tighter, try using a pair of tweezers to pull apart the loops. You may need to use a magnifying glass to see what you’re doing. 

To loosen a very tight knot, place the necklace in a bowl of warm water for a few minutes to help loosen the fibers before trying to untangle it.

With a little patience, you should be able to get those pesky knots out in no time!

How Do You Untangle A Knot In A Fine Necklace?

There are a few different ways that you can go about untangling a knot in a fine necklace or a love knot necklace. 

The first thing you’ll need to do is identify the type of knot that you’re dealing with. Once you know what kind of knot it is, you can use the appropriate technique to get it undone.

One of the most common knots in necklaces is the overhand knot. This is where the chain has been looped around and then pulled through itself to create a small, tight knot. 

To undo an overhand knot, simply hold onto both ends of the chain and gently pull them apart. You may need to wiggle the chain back and forth a bit to loosen the knot before it will come undone. 

Another common type of knot is called a double overhand knot. This is similar to an overhand knot, but there are two loops instead of just one.

To undo a double overhand knot, start by holding onto one end of the chain and then threading the other end through both loops. Once you have done this, gently pull on both ends of the chain until the knots come undone. 

If you’re dealing with a more complicated type of knot, such as a series of intertwined loops, then you may need to use a pair of needle-nose pliers to carefully pick apart the individual strands.

Start by gently gripping one strand with the pliers and then slowly working it free from the others. Once you have one strand loose, work on freeing up another until all of the strands are separated and untangled.

How To Get Small Knots Out Of Necklaces

If you have a necklace with small knots, there are a few different ways that you can get them out. One way is to use a small needle or pin to carefully unpick the knots. Another way is to place the necklace in a bowl of warm water and add a few drops of dish soap.

Let the necklace soak for 10-15 minutes and then gently brush the knots with your fingers. The soap will help to loosen the knots and make them easier to remove. You can also try using a small amount of baby oil or petroleum jelly on the knots.

Let the oil sit for a few minutes before gently rubbing it into the knots with your fingers.

How To Untangle A Necklace With Salt? 

If you have ever had the unfortunate experience of having a necklace become hopelessly tangled, you know how frustrating it can be. But there is hope! With a little salt and some patience, you can untangle even the most knotted necklace.

Here’s how: 

  1. Pour a small amount of salt onto a flat surface.
  2. Lay your tangled necklace on top of the salt.
  3. Using a toothpick or other sharp object, slowly and carefully start picking at the knots in the necklace, working them loose bit by bit. It may take some time, but eventually, all of the knots will come undone.
  4. Once the knots are gone, brush away any excess salt and your necklace will be good as new!

Professional Necklace Untangler

If you wear a lot of necklaces, you know the pain of them getting tangled. It’s so frustrating when you’re trying to get ready and your necklaces are in a big knot. 

But don’t worry, there is a professional necklace untangler out there who can help! This professional uses a special technique to quickly and easily untangle any necklace. 

They have years of experience and know exactly how to handle delicate jewelry. So if you’re ever in a bind, give this person a call and they’ll have your necklaces looking good as new in no time!

How to Untangle a Necklace With Baby Powder? 

If you’ve ever had a necklace become tangled, you know how frustrating it can be. But there’s an easy way to untangle even the most stubborn necklace using just baby powder. Here’s how:

  1. Start by laying your necklace out on a flat surface. If it’s really tangled, you may need to use a needle or other sharp object to loosen some of the knots.
  2. Once your necklace is as straight as possible, sprinkle a generous amount of baby powder over the entire length of the chain.
  3. Using your fingers, gently work the baby powder into all of the nooks and crannies of the necklace, making sure each link is coated.
  4. Once the entire necklace is covered in baby powder, slowly begin working out the knots and tangles. The baby powder will help lubricate the links and make them slide past each other more easily.

How To Untangle A Necklace With Water? 

If your necklace has become knotted, there’s no need to call a professional jeweler to fix it. With a little bit of water and patience, you can untangle even the most stubborn knots. Here’s how:

Fill a bowl with lukewarm water and add a drop of dish soap. Submerge the knotted necklace in soapy water and let it soak for 10-15 minutes. Use your fingers to gently loosen the knots, being careful not to pull too hard on any one strand.

If the knots are still tight, repeat steps 1-3. Once the knots are loose, lay the necklace out on a flat surface. Use a needle or other sharp object to carefully work out any remaining tangles.

Rinse the necklace in clean water and pat it dry with a soft cloth before putting it back on or storing it away.

Conclusion

If you have a necklace that has gotten tangled, there are a few ways you can untangle it. You can try using your fingers to work the knots out, or you can use a pair of pliers. If the knots are really tight, you may need to cut the necklace and start over.